Zigzag feeder HTP is a servo feeder that feeds the material into the press machine with a simultaneous X-Y movement.
It can optimize metal material utilization.
Applicable Material
-
Material Thickness: 0.2-2.0 mm
-
Coil Width: 20mm to 200/300/400/500/600/800mm
Performance Speed
-
Feeding Speed Max. 20 m/min
-
Zigzag Movement Speed Max. 30 m/min
-
Feeding Accuracy: ± 0.08 mm
Features of HTP Servo Roll Feeders
-
HTP is one type of servo feeder, specially designed for blanking line and multi-stage stamping press feeding. It’s easy to operate and has high automation performance.
-
The zigzag feeder uses high-speed linear bearings, rails with special treatment, low noise, high wear resistance, low friction load, smooth movement speed.
-
It has 1 set of Mitsubishi PLC and 2 sets of Yaskawa servo system. One servo system controls the feeding, another servo system controls the zigzag movement.
Specification of Servo Feeder
Model | HTP-200 | HTP-300 | HTP-400 | HTP-500 | HTP-600 | NCP-800 |
|---|---|---|---|---|---|---|
Max. Coil Width | 200 mm | 300 mm | 400 mm | 500 mm | 600 mm | 800 mm |
Strip Thickness | 0.2-2.0 mm | 0.2-2.0 mm | 0.2-2.0 mm | 0.2-2.0 mm | 0.2-2.0 mm | 0.2-2.0 mm |
Roller Release | Pneumatic | Pneumatic | Pneumatic | Pneumatic | Pneumatic | Pneumatic |
Feed Roll | 1/1 | 1/1 | 1/1 | 1/1 | 1/1 | 1/1 |
Max. Feed Length | 9999.99 mm | 9999.99 mm | 9999.99 mm | 9999.99 mm | 9999.99 mm | 9999.99 mm |
Max. Feed Speed | 20m/min | 20m/min | 20m/min | 20m/min | 20m/min | 20m/min |
Max. Zigzag Speed | 30m/min | 30m/min | 30m/min | 30m/min | 30m/min | 30m/min |
Accuracy | ± 0.1 mm | ± 0.1 mm | ± 0.1 mm | ± 0.1 mm | ± 0.1 mm | ± 0.1 mm |
Servo System | Yaskawa | Yaskawa | Yaskawa | Yaskawa | Yaskawa | Yaskawa |
PLC | Mitsubishi | Mitsubishi | Mitsubishi | Mitsubishi | Mitsubishi | Mitsubishi |